Comprehensive Guide to Fix Cannot Join WiFi Network Issue
In order to gain access to a blazing-fast internet connection on your device, you need to join WiFi network of your Netgear router. And for that, you must know its SSID. But, if you are facing issues while trying to connect your device to the Netgear router’s network, fret not because we are here to assist you.
Below, we have discussed some of the most effective troubleshooting hacks that will help you get rid of the issue you’re currently stuck with. Thus, stick to reading.
Fixed: Cannot Join WiFi Network Name
Reboot Your Netgear Router
Technical glitches are one of the biggest reasons why your device is not able to join WiFi network of the Netgear router. To get rid of the glitches, you can try the easiest hack i.e. rebooting the router.
Continue reading and learn how to reboot your Netgear wireless router:
- Turn off your Netgear WiFi router and unplug it from its power source.
- Wait for a couple of seconds.
- Plug your Netgear WiFi router back into its power source and turn it on.
Now, try to connect your device to the router’s network and check whether you are able to access routerlogin.net. If not, it means you are still stuck with the issue.
Verify the Ethernet Connection
If the Ethernet cable connecting your Netgear wireless router and the existing modem is worn out or damaged, it will make it difficult for them to transmit signals properly. Thus, make sure that the Ethernet cable you are using is free of damages.
Want to take the easier route? Well, in that case, it is recommended that you connect your devices with the help of a wireless source.
Bring WiFi Devices Closer
Is your Netgear wireless router placed away from the existing modem? Well, looks like we’ve discovered where you might have gone wrong.
The distance between your WiFi devices decides how well they perform. Thus, make sure that your router is placed in the same room as that of the modem.
Enter the Correct Password
Chances are that you did not make use of the correct WiFi password while making your device join WiFi network.
To troubleshoot the issue, ensure that you enter the correct WiFi password when required. If you are not sure about the password, we recommend you contact our technical experts. They don’t care at what hour of the day you ping them, they are always there to assist you.
Avoid WiFi Interference
Signal interference can be another reason why your device is not able to join WiFi network of Netgear router. Therefore, change the location of your Netgear router.
While doing so, make sure it is not being placed near corners, concrete walls, mirrors, fish tanks, treadmills, televisions, refrigerators, microwave ovens, cordless phones, washing machines, baby monitors, and Bluetooth speakers.
Install an Antivirus Software
Have you ever noticed how the presence of a virus can degrade the performance of your WiFi-enabled device?
If yes, then you might be well aware of the significance of installing antivirus software. So, what are you waiting for? Install antivirus software on your device if you haven’t done so already.
Reset Your Netgear Router
What happened? Did none of the aforementioned troubleshooting hacks help you get rid of the ‘cannot join WiFi network’ issue? Well, if that is the case, then your last resort is to perform factory default reset.
Here is how you can restore your Netgear router to the factory default mode:
- Locate the Reset hole on your wireless device.
- Take a pointy object and insert it into the hole.
- Wait for a few seconds.
Note: Whether you have configured a Netgear AX1800 WiFi router (RAX10) or another model at home, the aforementioned hacks will remain the same for all.
Sum Up
Your device ought to join WiFi network of the Netgear router if you are in a desperate need to access a lag-free internet connection. However, if you fail to do so, following the hacks mentioned above is worth a shot.
If even after following them you are not able to do what is needed, don’t waste any more time before getting in touch with our well-versed experts.